White smooth sbr rubber sheet

Production Name :

White smooth sbr rubber sheet

Specification:

thickness: 1~ 8 mm;

Width: 80mm-1.6 m;

Length: according to the requirements;

Parameters:

Polymer Content:2%-10%

specific gravity: 1.5 ~ 1.7;

Tensile strength:3-8mpa

Elongation: 150% - -350%

Hardness: 65 ° + / - 5 °;50-80 Duro

Color: White, black, red-brown, blue, red, green(Can be Customized)

Material:  Rubber (modified PVC),SBR, SBR/CR, SBR/NBR, SBR/EPDM

 Packaging & Shipping

China Factory White smooth sbr rubber sheet 

Packaging Detail:packed in woven bags, packaging film generation, fixed length, weight.

Delivery Detail:  within15days after receiving payment;For a full 20ft container, within 25 days after get the payment.

 Our Services

China Factory White smooth sbr rubber sheet with all thickness 

Sample Time:     5-7Days

Advantages:

1.Ribbed pattern floor mat can reduce slips and falls by increasing traction, even when exposed to moisture and chemicals.
2.Ribbed pattern floor mat design can channel fluids and other debris easily out of the floor. It is easy to install and maintain.
3.Ribbed mat is both comfortable and easy to clean. 
4.the medium pressure, waterproof, prevent slippery performance
5.Specialist conversion ability to produce in a variety of formats and

6.shapes to cater for all requirements. 
7.Can be extruded with various reinforcements running through them.

Customer Size Pot Bearing for Bridge Bridge bearing pad

Customer Size Pot Bearing for Bridge Bridge bearing pad

Product Description:

    Pot bearing, with elastomeric bearing pad fitted inside of steel plate, is the widest used type for transferring vertical or horizontal loads from superstructure to the pier as well as allowing rotations on any axis. Meanwhile, it’s capable to accommodate horizontal displacements of superstructure taking advantages of the reduced friction coefficient between stainless steel panels and a layer of PTFE.

Components:

[1]Steel top plates - capable to accommodate longitudinal or transverse sliding movements of the superstructure.

[2]Stainless steel panels & PTFE - reduce the friction resistance as well as horizontal force.

[3]Steel piston & internal brass sealing ring - protect the elastomer pad from extrusion.

[4]Elastomeric pad - behaves like a fluid under high pressure and allows higher working pressure with reduced dimensions.

[5]As your request, external rings can be supplied to make sure that the gap between piston and steel pot is free of moisture and debris.

Features:

(1)With low-profile yet high loading capability over 50,000 KN.

(2) Maximized shearing strength of elastomer pad through the method of encasing it in the steel pot.

(3) Allow for large rotations ranging from 0 to 0.03 rad.

(4) Low friction coefficient between 1% and 3%.

(5) Excellent fatigue, impact and aging resistance of the layer of PTFE.

(6) All the metallic parts are protected against corrosion by galvanization and epoxy painting according to EN 1337-9 (other protective coatings are available as your requirements).

(7) Easy and quick to install.

(8) Easy to maintain and replace the worn out and broken part.

(9) Complying with BS EN-1337, KS4424, AASHO, ISO or other custom standards.

Applications:Incrementally launched bridges.Curved or skewed bridges.Structures with rotations in various directions.Structures using the incremental launching methods.Highways and railways, etc.

Types:

According to horizontal movements, pot bearings can be classified into three types as follows:

[1]Free sliding pot bearing is able to slid and rotate in all directions without any restraints.

[2]Fixed pot bearing restrains movements in all directions. Under loads, the elastomeric bearing pad behaves likes an incompressible confined fluid which enables the rotations on any axis. 

[3]Edge & center guided bearing features fitted edge or center guide to limit the bearing’s movements. It allows for movements in longitudinal or transversal directions.

Note:

If the surface contacts with concrete, the above zinc and epoxy coatings are not recommended. The pot bearing can be electrical isolated to protect it from corrosion for some specific applications such as railway, etc.

Contact Information:

Nancy

Add:Nanwangzhuang village,Hengshui City,Hebei Province,China

Hengshui JingTong Engineering Rubber Co.,LtD

Tel: +86-318-2877988|Fax: +86-318-2877988|Phone:+86-15731809416

Skype: tradingnancy